Comilmart
🛍️
Comilmart Blog
← Back to blog

Sourcing & Trade Guide

How to Sell Medical Supplies and Devices in Africa: Registration and Buyers

C

Comilmart Team

November 17, 2026

To sell medical supplies in Africa, treat registration and procurement as the main project and the shipment as the last step. Medical consumables and devices are regulated in nearly every African market, buyers are often hospitals, distributors or public procurement offices, and the paperwork is detailed. This guide is only about regulation, documents, buyers and market entry. It does not discuss what any product does for health, and it does not replace advice from a regulatory specialist. It is general information, not legal advice. Confirm current requirements with the regulator, customs or a qualified specialist before you ship or promote any product.

Who buys medical supplies and how procurement works

  • Hospital supplies distributors Africa-wide import and stock consumables and equipment, supply hospitals and clinics and often hold the local licences that foreign manufacturers need.
  • Private hospitals, clinics and laboratories buy directly or through distributors, and they ask for registration status, quality certificates and service support.
  • Public institutions and programmes buy through formal procurement, with documents, bids and compliance checks. Tenders and procurement Africa-wide follow national rules, and a registered product and a licensed local party are often prerequisites.
  • Pharmacies and medical retailers buy lower-risk items for resale, where registration status still matters.
  • Donors and non-profit buyers may apply their own quality requirements on top of national rules.

For a model of how a mature exporting sector builds trust with African buyers, see how Indian pharmaceutical manufacturers build trust when they export. The lessons on documents and local partners apply to devices and consumables too.

First step: classify your product

Everything starts with classification. Regulators usually sort products by risk, and the higher the risk class, the more evidence they ask for. Typical questions you must answer early include these.

  • Is the product a device, a consumable, a diagnostic, a drug-device combination or something else?
  • Which risk class applies in the destination country, and does the classification match your home market?
  • Is it sterile, does it measure something, or is it a simple low-risk item? Some regulators treat low-risk, non-sterile, non-measuring items more lightly, as South Africa's regulator does for certain Class A devices, but you must confirm the current position.
  • Does it need an import permit in addition to registration?

Do not guess. A wrong classification can mean a rejected file, wasted fees and lost months.

Registration and licensing: general orientation

Nigeria

NAFDAC regulates medical devices as well as food, drugs and cosmetics. Its published guidelines for registering medical devices describe documents such as an application letter, a notarised power of attorney or manufacturer authorisation, evidence of free sale in the country of manufacture, quality and manufacturing evidence, labels and artwork, a declaration of conformity, and in some cases samples after an import permit. Applications are made on the regulator's online system. Details and validity periods are set in the guidelines, so read the current version. For another view of how regulated product certification works for exporters and importers, read the product certification guide for exporters and importers.

Kenya

Pharmaceuticals and related health products are registered through the Pharmacy and Poisons Board and the Ministry of Health, according to official trade guidance. Industry guidance indicates that foreign manufacturers without a local presence normally work through a licensed local representative who files applications and handles communication with the regulator. Confirm the current device regime directly with the board.

South Africa

The regulator SAHPRA requires a medical device establishment licence for those who manufacture, import, export or distribute devices, with different licence types for manufacturers, distributors and wholesalers. Applicants must appoint a South African-based authorised representative, and a valid licence is needed to bid for national and provincial tenders. Some low-risk Class A devices that are non-sterile and non-measuring are exempt under a position statement, but check the current statement.

Egypt and Ghana

In Egypt, trade guidance says that medical products, both drugs and devices, fall under the Ministry of Health, the national standards organisation and accredited laboratories. Ghana's Food and Drugs Authority is also reported to register medical devices. For both, ask a local regulatory specialist about the current rules and documents.

The common pattern across markets is clear: you usually need a local licensed party, a technical file, quality system evidence, authenticated or notarised documents, compliant labels and patience. Plan your timeline on the assumption that registration takes months rather than weeks, and confirm actual processing times with the regulator.

The documents you should prepare

  1. Technical file with product description, intended use, specifications, materials, design drawings and test reports.
  2. Quality system evidence, such as a recognised quality management certificate and manufacturing practice records, where the regulator asks for them.
  3. Declaration of conformity and references to standards you meet.
  4. Proof of legal sale in your home market, such as a certificate of free sale, with any required authentication.
  5. Authorisation letter or power of attorney naming your local representative, notarised or legalised as needed.
  6. Labels and instructions for use in the required language, with batch, manufacture and expiry details where relevant.
  7. Company registration and trademark evidence where the regulator requires it.

Keep one master set and update it carefully. Different regulators may ask for the same documents in slightly different forms, so a consistent master file saves time.

Choosing a local representative or distributor

This is the most important commercial decision in the category. Look for a partner who holds the right licences, understands the regulator's process, has storage and transport suited to your product, and has references from other manufacturers. Agree in writing who owns the registration, who pays for renewals and what happens if the relationship ends. In some systems the local representative holds the registration certificate, so you need a clear exit and transfer clause. Do not hand over exclusivity before the partner has proved performance.

Labels, language and traceability

Labels must meet the destination rules and often need to be in the market language. Include batch numbers, manufacture and expiry dates for products that need them, and keep traceability records so you can identify a batch quickly if a regulator or buyer asks. Egypt expects Arabic labels on finished goods, and many other markets expect English or French. Use clear, plain language and avoid claims that are not in your approved file.

Counterfeits, grey trade and diversion

Falsified and diverted medical goods are a concern for regulators and buyers. Register your trademark, use tamper-evident packaging and batch codes, sell through authorised distributors, and keep a record of which distributor received which batch. Tell your partners how to report suspicious stock.

Pricing, payment and tender readiness

We do not give prices or margins, because they vary by product and country. For tenders, expect formal documents: a quotation, registration proof, quality certificates, delivery terms, validity periods and sometimes performance or bid security. Prepare a standard tender pack once and adapt it. For first commercial orders outside tenders, use secured payment terms and agree acceptance and return conditions in writing. Institutional payment cycles can be slower than commercial ones, so check financing needs with your local partner. See the trade financing information page for general background.

A pilot plan

  1. Choose one market and one product family with simple classification.
  2. Ask a local specialist or the regulator to confirm the route, classification, documents and who can apply.
  3. Shortlist two or three licensed local partners and check their licences and references.
  4. Prepare the technical file and labels, then submit through the local representative.
  5. While you wait, prepare a tender pack and price list so you can respond when registration arrives.
  6. Start with a small commercial order after approval and review documentation, delivery and acceptance before you scale.

Before your first African order, our first African B2B order checklist for international manufacturers is a useful practical companion.

Common mistakes

  • Shipping samples or stock before registration or import permits are in place.
  • Choosing a distributor only on price, without checking licences.
  • Using documents that are not notarised or authenticated as required.
  • Making product claims that are not in the approved file.
  • Letting a registration lapse because nobody tracks renewal dates.
  • Ignoring tender document requirements until the deadline.

Anyone searching for medical device registration Africa guidance will find that each country keeps its own system. Brands that want to export medical consumables to Africa should plan registration country by country, starting with one market. In Nigeria, the pattern for NAFDAC medical devices is a documented file filed through a licensed local party; in South Africa it is an establishment licence and an authorised representative. Whichever country you choose, keep the master file consistent so that updates are made once and reused.

Frequently asked questions

Do I need a local representative to sell medical devices in Africa? Many regulators require or expect one, especially for foreign manufacturers without a local presence. Confirm the rule for each country.

Can one registration cover several countries? Usually not. Registration is generally national, although regional efforts exist. Plan per market and confirm any harmonisation with the regulators.

How long does registration take? It varies by country, risk class and file quality. Ask the regulator or your local partner for current expectations, and plan for months.

Can I send free samples? Rules differ. Some regulators issue permits for samples used for registration; others restrict them. Ask before you ship.

Do I need an ISO quality certificate? Many regulators ask for quality system evidence, and some require recognised certification at some stage. Check the current requirement per market.

Is this legal or medical advice? No. It is general regulatory information only. Confirm current requirements with the regulator, customs or a qualified specialist.

Getting started

Comilmart is an African B2B and B2C marketplace that connects buyers with verified manufacturers, wholesalers and vendors across Africa. International manufacturers apply through the supplier process and go through verification. When your registrations or regulatory plan are clear, Apply as a supplier on Comilmart; there are no listing fees to get started. Buyers can also post requests through RFQ sourcing. For related agricultural categories, see selling agricultural machinery and inputs in Africa, and for the wider picture read why international manufacturers should sell in Africa.

Related guides

Comments

Log in to join the conversation.

Loading comments…