Comilmart
🛍️
Comilmart Blog
← Back to blog

Sourcing & Trade Guide

How to Pack and Label African Products for Export: A Practical Guide for Manufacturers

C

Comilmart Team

November 15, 2026

Export packaging and labelling decide whether your goods arrive in saleable condition and whether customs and retailers accept them. Most export claims come from avoidable causes: weak cartons, moisture, poor palletising, missing marks and labels that do not match the documents. This guide gives African manufacturers a practical process for packing and labelling products for sea and air freight, with general rules that apply across products and clear warnings where destination rules take over. Every destination market has its own requirements, so use this as a framework and confirm details with your importer, your forwarder and the relevant authority.

Plan packaging for the whole journey

Start by listing every stage the product will pass through: factory, local transport, port or airport, ship or aircraft, destination port, customs, warehouse, final delivery and shelf. Each stage has its own risks. Sea freight brings humidity, temperature swings and condensation inside the container. Air freight brings weight limits and handling at speed. Trucks bring vibration and compression. Packaging has to protect the goods through all of them, and the right design is usually the one that survives the worst stage, not the average one.

These are the main export packaging requirements to plan for:

  • Product protection. Inner packs, wraps, liners and cushioning to stop breakage, scuffing and contamination.
  • Carton strength. Cartons strong enough to be stacked to the height used in the container or warehouse without crushing.
  • Moisture control. Barrier films, liners and desiccants where goods are sensitive.
  • Unitisation. Cartons stacked on pallets and secured so that they move as one block.
  • Marking. Shipping marks and handling symbols that tell people how to treat the goods.
  • Compliance. Wood packaging, labels and documents that match destination rules.

Cartons and inner packs

Choose cartons by weight, stacking load and product fragility. A carton that is too large lets the product move, and a carton that is too small can bulge and split. Aim for a snug fit with cushioning where needed. Use quality tape and apply it correctly on seams, and use strapping or corner protectors for heavy cartons. Do not overfill, because overfilled cartons deform and damage the goods on the bottom of a stack.

For food, cosmetics and other products with hygiene needs, use inner packaging that is suitable for the product and for contact with it, and ask your supplier of packaging material for evidence of suitability. For choices of materials sold in West Africa, see our guide to wholesale packaging materials.

Pallet and carton specifications

Pallet and carton specifications should be agreed with the buyer and the forwarder before you pack. Buyers often state the carton dimensions, maximum carton weight, units per carton and maximum pallet height. Common pallet sizes in international trade differ by region, so ask your buyer which pallet type they use rather than assuming. Your forwarder can tell you how many pallets or cartons fit in the container you plan to use.

Good practice includes:

  • Stack cartons in a stable pattern, with no overhang beyond the pallet edge.
  • Use stretch film, corner boards and straps to secure the load.
  • Put the heaviest cartons at the bottom and keep the top flat if more pallets will be stacked on it.
  • Record units per carton, cartons per pallet, pallet gross weight and dimensions, because these appear on the packing list.
  • Keep carton weights within what a person or a forklift can safely handle.

If you use wooden pallets, crates or dunnage, be aware of ISPM 15. This international standard regulates solid wood packaging in trade. According to an Australian government explanation of the standard, it covers pallets, crates, dunnage and similar items, requires treatment such as heat treatment or fumigation, and requires a mark showing the IPPC symbol, a country code, a certification number and a treatment code. It also lists exemptions, such as certain processed wood products. Many countries apply it, but details vary, so confirm with your forwarder or the destination authority and buy pallets from a certified supplier.

Moisture and shipping damage prevention

Moisture and shipping damage prevention matters most on sea routes. Warm, humid air inside a container can condense on cold surfaces when temperatures change, and the resulting drops can wet cartons and goods. Steps to reduce the risk:

  • Make sure goods and packaging are dry before loading. Packing damp products traps moisture.
  • Use barrier liners or sealed inner bags for sensitive goods such as foods, powders, paper and textiles.
  • Consider desiccants or container desiccant products where the product allows, and ask your forwarder for advice on ventilation and container condition.
  • Check the container before loading: floor, walls, roof, door seals, smell and cleanliness. Reject a container that leaks or has residues.
  • Load so that cartons do not touch the container walls directly where condensation can drip, and block the load so it cannot shift.
  • Keep goods off wet ground at the factory and at the port.

Photograph the packing process, the loaded container, the door seal and the seal number. If a claim arises, these photographs and the packing records are your evidence, and cargo insurance requires proof of condition. For documents that travel with the goods, see our guide to the bill of lading, commercial invoice and packing list.

Labelling for export

Product labelling for export has two parts: labels on the product or retail pack, and marks on the outer carton and pallet.

Retail and product labels. What must appear depends on the product and the destination. For food, a guideline from Nigeria's food regulator on labelling food products for export lists items such as the product name, ingredients with allergens highlighted, net quantity in metric units, country of origin, manufacturer and exporter details, batch or lot number, manufacturing and expiry or best-before dates, storage instructions, nutrition information and a barcode where applicable. It also covers language, and says that a label printed only in the importing country's language carries an export-only declaration. That guideline is for Nigerian food exporters, and the importing country's rules apply too. For cosmetics, electrical goods, textiles, chemicals and other categories, requirements are different again. Ask your importer to send the destination's labelling rules in writing, and check them with the relevant authority or a specialist.

Carton and pallet marks. Typical marks include the product description and code, the quantity, gross and net weight, carton number out of total, country of origin, the buyer's reference or purchase order number, and handling symbols such as "this way up", "fragile" and "keep dry". Use waterproof ink or labels, and place marks on at least two sides. Match every mark to the packing list and invoice.

Lot numbers deserve special mention. A lot or batch number on every pack and carton lets you trace a problem back to a production run, and is expected by food buyers in particular. For the wider food safety framework, read our guide to the export readiness checklist for manufacturers, and for certification questions see our guide to product certification for exporters and importers.

Barcodes and GS1 for export

Retailers usually need a barcode on retail packs so that products can be scanned at the till and tracked in their systems. Barcodes GS1 export programmes rely on come from GS1, the organisation that manages the global numbering standard. GS1's support pages explain that to get a GS1 company prefix you contact the GS1 member organisation in your region, which then provides your prefix, and you assign a unique number to each product from the numbers linked to it. Do not copy barcodes from other products or buy numbers from unofficial resellers, because retailers may reject them. Ask your buyer which barcode type and number format they need, and check with GS1 in your country about membership and fees.

A barcode identifies the product and the owner of the number, and it does not replace the required label information.

Packing for air freight

Air freight is charged on weight and volume, so every extra gram and cubic centimetre costs money. Lightweight but strong packaging, tight carton sizing and good cushioning are the priorities. Check the airline's and the forwarder's rules on carton size, weight, battery or liquid restrictions and dangerous goods. Perishable goods need specialised packing and temperature control, so speak to a perishables forwarder early.

A packing and labelling checklist

  1. Get the buyer's written packing, labelling and barcode requirements before production.
  2. Choose inner packs, cartons and pallets suited to the weakest point on the route.
  3. Confirm carton size, weight, units per carton and pallet pattern with the forwarder.
  4. Use treated and marked wood packaging where wood is used.
  5. Protect against moisture with dry goods, liners and a clean container.
  6. Print labels and marks that match the invoice and packing list exactly.
  7. Put lot numbers on packs and cartons and record them.
  8. Photograph the packing, loading and seal, and keep the photographs with the shipment file.

Common mistakes

  • Using cartons that cannot bear the stacking load.
  • Loading products that are still damp or warm.
  • Using untreated or unmarked wooden pallets or crates.
  • Labels that differ from the invoice, or in the wrong language or format.
  • Missing lot numbers, expiry dates or origin marks.
  • Loose loads that shift and crush other cartons.
  • No photographs, so claims cannot be proved.

Frequently asked questions

What are the basic export packaging requirements? Protect the product, use strong cartons, control moisture, secure the load on pallets, mark packages clearly and follow destination rules. Always ask the buyer for their specification.

Do I need ISPM 15 pallets? Many countries require treated and marked wood packaging. Confirm with your forwarder and the destination authority.

Do I need a GS1 barcode to export? Not always, but many retailers require one on retail packs. Ask your buyer, and contact GS1 in your country.

What should be on a carton label? Typically the product description, quantity, weights, origin, buyer reference and handling symbols. Confirm with the buyer.

How do I stop condensation damage in containers? Load dry goods, use barriers and desiccants where suitable, check the container and block the load. Discuss options with your forwarder.

Who is responsible if goods arrive damaged? It depends on the Incoterm, the contract and the insurance. Agree these terms in writing before shipping.

Getting started

Good packing makes every other part of exporting easier. Manufacturers can apply as a supplier on Comilmart, with no listing fees to get started, and describe their packaging, carton sizes and labelling in their listings so buyers know what to expect. Comilmart connects buyers with verified sellers across Africa, and buyers can post a request at RFQ sourcing on Comilmart. This is general information, so confirm labelling, wood packaging and import rules with the relevant authority or a specialist.

Related guides

Comments

Log in to join the conversation.

Loading comments…